2005年1月11日 07:482005年1月11日 Scaling models in Milkshape by Kais Milkshape knowledge required. 1) Select the model (you'll probably just want to select the actual gun itself, if so just select that, but obviously if you want to scale the arms too then select them as well) 2) Click on the 'Scale' button on the 'Model' tab on the right-hand side. 3) Now, you can either manually move it around (which often means you'll warp it), or you can change the values in the text boxes labeled X Y and Z at the bottom, then click on 'Scale', which will scale it all equally. For example, say you want to have a Desert Eagle.50 model at one and a half times the usual size, you'd type in each of the three text boxes '1.5', then click 'Scale', and the Deagle would be bigger. If you want to make it smaller, say half the size, you'd type 0.5. 4) After it's been scaled, you may then have to move the model around so it fits back into the hands, to stop clipping. Then all you do is export the model and compile.
Create an account or sign in to comment